Rotor Safety Guide - Beckman

Beckman manual tubes

Add: jezot29 - Date: 2021-04-28 11:20:44 - Views: 2075 - Clicks: 6047

1. Fixed angle rotors hold the tubes at an angle to the axis of rotation. • Rotors are designed for use at the rated speeds indicated; however, speed reductions may be required because of weight considerations of tubes, adapters, or the density of the solution being centrifuged. The rotors were developed, manufactured, and te sted for safety and reliability as part of a Beckman Coulter ultracentrifuge/rotor system. 1. Reference Documents: SW 28 28. Beckman Coulter Life Sciences is taking actions in the best interests of our associates, customers, and business partners as we navigate the growing threats of the Novel Coronavirus disease (COVID-19). Certified Free and Sterile Tubes. Rotors are included with information on speed and g-force capability. Type 45 Ti Rotor Assembly, Fixed-Angle Rotor, Titanium. Verify that the tubes and bottles being used are listed in Table 1 or Table 2. Correct Symmetry When Balancing a Partial Load – A Top View of a Horizontal Rotor Example of a balanced load: Assuming all tubes have been filled with an equal amount of liquid, this rotor load is balanced. A. The angle varies with different rotors, somewhere between 25° to 40° being common. Older JA-10 rotors without magnets, p/n 334833, can be used in J2 and J6 series centrifuges. The MLA-80 fixed angle rotor, rated for 80,000 rpm, has a tube angle of 26 degrees from the axis of rotation. They are for use with the specified Beckman Coulter ultracentrifuges. Verify that the tubes and bottles being used are listed in Table 1. Also included is information on tubes and bottles that can be used and the adapters they require. R. SW 28. If tubes/bottles are overfilled or if leakage occurs during. Beckman rotors and tubes manual

The short pathlength and low k factors of these rotors mean that the particle has only a short distance to travel to pellet, reducing the run time for the application. Check the chemical compatibilities of all materials used (refer to Appendix A in Rotors and Tubes). Tube sizes noted in the following charts are nominal sizes and may vary somewhat from actual filling capacities. • The An-50 Ti analytical rotor is an eight-place titanium rotor (painted black), rated for 50 000 rpm. Also observe any safety information contained in applicable rotor and instrument manuals. LidLid O-ringRotor O-ring. 1. The rotor is made of titanium and is finished with black polyurethane paint. J Series Rotors and Tubes Manual (JR-IM) along with this rotor manual for complete rotor and accessory operation. Infor- mation common to this and other rotors is contained in Rotors and Tubes for Preparative Ultracentrifuges (publication LR-IM) which accompanies this manual. For use in instruments classified: H R S. Beckman Coulter SW 60 Ti rotors are manufactured in a facility that maintains certifications to both ISO 9001: and ISO 13485:. ! Also for: Avanti j-20 xp series, Avanti j-25 series, J2 series, J6 series, Avanti j-30 i, Avanti jxn 30, Avanti jxn-26,. . The rotor manuals provide specific information for each rotor, including special operating procedures and precautions, tube, bottle, and adapter part numbers, and equations to calculate maximum allowable rotor speeds. ) Refer to Appendix A in Rotors and Tubes for chemical compatibili-. Tubes and bottles are cross-referenced in a separate section which provides details on tube materials, chemical compatibility, tube designs, and tube closure options. Refer to the applicable rotor manual and Chemical Resistances (publication IN-175) for instructions on the care of rotors and rotor accessories. Also, for the ultracentrifuge swinging bucket rotors, they have racks that allow the buckets to be removed from the rotor body and filled with tubes under a biocontainment hood. J Series Rotors and Tubes manual (JR-IM) along with this rotor manual for complete rotor and accessory operation. Beckman rotors and tubes manual

Also included is information on tubes and bottles that can be used and the adapters they require. For your ordering convenience, most Beckman Coulter Fixed-Angle Rotors are sold as Rotor Assemblies with a choice of Tube Kits. Be sure to use only those items listed, and to observe the maximum speed limits and fill volumes shown. THE ROTOR These rotors have been manufactured in an NSAI-registered ISO 9001 or 9002 facility for use with the appropriately classified Beckman Coulter analytical ultracentrifuges. The rotor can centrifuge up to eight tubes and is used in Beckman Coulter Optima MAX,. Missing rotor lid or cap Refer to the applicable rotor manual. Beckman Coulter Life Sciences is taking actions in the best interests of our associates, customers, and business partners as we navigate the growing threats of the Novel Coronavirus disease (COVID-19). 2. Review (mpn: 369668 for saleUltracentrifuge Pn User Beckman Rotor Tubes Coulter Manual. Rotors and Tubes. Although particles sediment along a radial path in these rotors also, they soon strike the opposite side of the tube where they slide down the wall to the bottom. Refer to your Rotor Instruction Manual for specific detail regarding maximum filling levels of tubes. View and Download Beckman Coulter Avanti J Series instructions for use manual online. Check the chemical compatibilities of all materials used. Use of other manufacturers’ components or accessories in. • NEVER. The rotor can centrifuge up to 20 tubes and is used in Beckman Coulter Optima™ MAX, MAX-E, TL, TLX, and the TL-100 tabletop ultracentrifuges. Verify that the tubes and bottles being used are listed in Table 1. Detrick, MD, U. 1 Ti Rotor (Part Number 342214); Bucket Set (Part Number 342212). L. Use this rotor manual, together with publication LR-IM, for complete rotor and accessory operation. Beckman rotors and tubes manual

Vertical angle rotors feature the shortest pathlength of any rotor type, the fastest run time, and the highest resolution. Optima XL Instruction Manual (LXL-IM). Quick-reference charts on instrument and tube selection, as. Each kit comes complete with up to 200 tubes, the appropriate. Make sure that the rotor and lid are clean and show no signs of corrosion or cracking. Rotors and Tubes. Section that provides details on tube materials, chemical compatibility, tube designs, and tube closure options. In a vertical rotor, tubes are vertical during the run. 1 Newer JA-10 rotors with magnets, p/n 369687, cannot be used in J2 or J6 series centrifuges. ). For rotors that accommodate OptiSeal™ and Quick-Seal® tubes, you can order kits with these tubes instead of a Rotor Package with capped tubes only. ROTOR PREPARATION For runs at other than room temperature, refrigerate or warm the rotor beforehand for fast equilibration. Check the chemical compatibilities of all materials used (refer to Appendix A in Rotors and Tubes). Observance of safety precautions will help to avoid actions that could cause personal injury, as well as damage or adversely affect the performance of the instrument/rotor/tube system. 1 Ti Rotor Manual. 1. 4. Part : 369668 prices General centrifugepartzo: Business & Industrial > Healthcare, Lab & Life Science > Lab Equipment > Centrifuges & Parts > Rotors & Parts; in stock: Yes; condition: New other. 3. Be sure to observe the instructions in the appropriate rotor manual. TUBES AND BOTTLES The Type 45 Ti rotor uses the tubes and bottles listed in Table 1. 3. Beckman rotors and tubes manual

Avanti J Series laboratory equipment pdf manual download. S. • Use only the Beckman rotors and accessories designed for use in this centrifuge. Your instruction manual will tell you what speeds to avoid. See the Beckman Coulter Benchtop Rotors, Tubes. ROTOR PREPARATION For runs at other than room temperature, refrigerate or warm the rotor beforehand for fast equilibration. (Refer to Appendix A in Rotors and Tubes. SW 40 Ti Rotor Package Includes: Part Number Description 331302; SW 40 Ti Swinging-Bucket Rotor 330070; Hinge Pin Tool 331313; Bucket Holder Rack 331374; Polypropylene Tubes (2 boxes) 344060; Ultra-Clear Tubes 335148; Vacuum Grease 306812; Spinkote Lubricant 330335; Overspeed Disks, 41,009; Gasket for Bucket Note: This rotor cannot be used in 40,000 rpm F or H instruments or the L5-50E unless the instruments have been upgraded with a diffusion pump and vacuum indicator. . Verify that the tubes being used are listed in Table 3. Make sure that the rotor and lid are clean and show no signs of corrosion or cracking. • Refer to individual rotor manuals for specific information on expiration dates. ) Refer to Appendix A in Rotors and Tubes for chemical compatibili-. Read the Safety Notice page at the front of this manual before using the rotor. Be sure to use only those items listed, and to observe the maximum speed limits and fill volumes shown. The TLA-100 fixed angle rotor, rated forrpm, has a tube angle of 30 degrees from the axis of rotation. Observe load and speed recommendations All rotors are designed to carry a maximum load at a specific maximum speed, so be sure to follow all operational specifications in your rotor manual. Rotors are included with information on speed and g-force capability. 1 Validation of microbiological containment was done at an independent third-party testing facility (CAMR, Port Down, UK, or USAM RIID, Ft. If a Rotor Manual has been lost, contact your local Beckman Coulter office to request a replacement. Beckman Coulter provides a comprehensive library of centrifuge rotors for maximum efficiency in a wide range of applications. Beckman rotors and tubes manual

Indicated in the rotor manual or engraved on the rotor. • Do not exceed the maximum rated speed of the rotor in use. Rotors and Tubes. Part number CD containing rotors and tubes manual. • Before starting the centrifuge, make sure that the rotor tie-down knob is securely fastened. 32 000-rpm 56. Page 41: Chapter 5: Maintenance Instrument Care NOTE It is your responsibility to decontaminate the instrument, as well as any rotors and/or accessories, before requesting service by Beckman Coulter Field Service representatives. Fluid Containment Annulus Rotor has a fluid-containment annulus, located below the O-ring sealing surface. J Series Rotors and Tubes manual (JR-IM) and the centrifuge instruc-tion manual along with this rotor manual for complete rotor and accessory operation. This rotor has been manufactured in a registered ISO 9 001 or 13485 facility for use with the appropriately classified Beckman Coulter ultracentrifuges. Publication LR-IM is included in the literature package with this rotor manual. Manual to determine the correct rotor speed. When running a thick-walled tube uncapped, the maximum filling volume will depend on tube angle. NOTE Although rotor components and accessories made by other manufacturers may fit in the JA-21 rotor, their safety in this rotor cannot be ascertained by Beckman Coulter. Read the Safety Notice page at the front of this manual before using the rotor. 2. Check the chemical compatibilities of all materials used (refer to Appendix A in Rotors and Tubes). Beckman rotors and tubes manual

SW 32 Ti and SW 32.1 Ti Rotors -

email: [email protected] - phone:(954) 280-3778 x 9123

Edgewater 4550 manual - Oncologia saude

-> Manual placa m2n4-sli
-> Mercury 115 manual tilt

SW 32 Ti and SW 32.1 Ti Rotors - - Agent converter manually


Sitemap 25

Manual motion control siemens - Istruzioni arielli manuale